South Coast Electrical Solutions
Test and Tagging Service Batemans Bay
South Coast Electrical Solutions


Test and Tag Batemans Bay

Electrical Test and Tag Compliance services in Batemans Bay

South Coast Electrical Solutions offers a professional electrical Testing and Tagging service. We operate in Batemans Bay and the surrounding areas and offer services to protect your business, staff, office, home, school, nursing home and workshop.

South Coast Electrical Solutions can Test and Tag all electrical appliances and equipment and provide you with a comprehensive report on completion.

South Coast Electrical Solutions will conduct the following checks and inspections for test and tagging: Visual Inspection, protective earth continuity test, insulation test, polarity and Test and Tag the electrical equipment in accordance with the Australian Standards.

Test and Tag Service Batemans Bay

Test and tag compliance services are available for:

  • Home
  • Business
  • Office
  • Industrial Sites
  • Nursing Homes
  • Schools
  • Workshops
  • Retail shops

Appliances are tagged using a Bar Coded Electrical Tracking System

South Coast Electrical Solutions test and tag electrical equipment and appliances with an identifiable bar code for continual identification purposes. All data collected including location and test results are entered into our database and coded data can be presented in both electronic and print format.

Equipment South Coast Electrical Solutions will test and tag:

  • Air Compressors
  • Audio Visual Equipment
  • Appliances – ( Kettle , Toaster, Blender, Coffee Machine etc)
  • Computers
  • Drills
  • Extension Leads
  • Fax Machines
  • Fans ( Hardwired fans not required)
  • Fork Lift Chargers
  • Grinders
  • Microwave
  • Phone Chargers
  • Photocopiers
  • Portable electric motors / machinery
  • RCD – Safety switches
  • 3 Phase Equipment

Microwave Radiation Leakage Test.

South Coast Electrical Solutions use a microwave leakage tester to ensure your environment isn’t being negatively impacted by radioactive energy.

Our technicians inspect the microwave oven for any signs of physical damage. We use a microwave radiation detector, a radiation leakage test is carried out to make sure your microwave meet Australian safety standards. Our electricians are all fully qualified and we use only the most advanced tools to guarantee the best quality work. South Coast Electrical Solutions can also provide certification tags and schedule in future services to help keep everything up to date.

Microwave Radiation Leakage Test Service

Extension Lead Testing and Tagging

If you require your extension lead test and tagged, South Coast Electrical Solutions will conduct a visual inspection of the insulation of the lead, we look for abrasions as well as checking the pins and plug end. Tests which are performed include earth continuity, insulation resistance and Polarity. If an extension lead is faulty. If the extension leads plug is damaged or the cables are exposed, our technician can replace the plug on the extension lead and retest and tag the lead. A compliant extension lead is critically important when on site as this can pose an electrical hazard to both the operator and bystanders.

Test and Tagging Power Tools

South Coast Electrical Solutions Test and Tag complete visual inspection of the cable and plug end for signs of damage and wear and tear before performing a test using our Portable Appliance Tester to carry out the test and ensure the appliance is safe and compliant. South Coast Electrical Solutions Test and Tag are setup to perform all test and tagging for builders, plumbers, painter, tilers, plasters and other tradespeople requiring their equipment and tools to be tested and compliant. Our test and tag team come to you at your workshop, home or on site as required.

Computers Laptops and Chargers test and tag service.

Computers, monitors, printers, scanners, and electrical connected items in your office or business that plug into a power point need to be tested.

Test and Tag of electrical items in your business is not just a once off process. Depending on the type of environment you are working in, testing is carried out every 3, 6, 12 or 24 months. This will be discussed before we start testing your equipment.

Before testing is conducted, a visual inspection of the cable, and plug ends is conducted. Once the Test is completed and a PASS result is achieved the cable, device or computer screen will be tagged accordingly and detailed in the report.

Test and Tag can be conducted by South Coast Electrical Solutions at your office, business or on the job site as required.

Test and Tagging Service

RCD Testing Compliance Service

A residual current device, RCD, or safety switch, protects you from the most frequent cause of electrocution – a shock from electricity passing through the body to the earth. It can also provide some protection against electrical fires.

The current building and electrical wiring regulations specify RCD’s are to be installed on all circuits in all new installations and also where any changes to the electrical installation have been made.

An RCD, is designed to save lives from an electric shock if you or someone in your business or office touches something live, such as faulty appliance.

South Coast Electrical Solutions will inspect, test and tag your workplace Fixed and Portable RCD’s in accordance with Australian Standards.

NSW Government managing electrical risks at the workplace code of practice has more information:

Managing Electrical Risks in the workplace.

RCD Testing

South Coast Electrical Solutions Technician clearances and checks

  • National/State police records check
  • Working with children check
  • White card – Construction industry OH&S induction

Our electricians service the following areas

  • Batehaven
  • Batemans Bay
  • Broulee
  • Catalina
  • Denhams Beach
  • Durras
  • Guerilla Bay
  • Lilli Pilli
  • Long Beach
  • Maloneys Beach
  • Malua Bay
  • Mogo
  • Moruya
  • Mossy Point
  • Nelligen
  • Rosedale
  • Sunshine Bay
  • Surf Beach
  • Surfside

Testing and Tagging for all electrical appliances is necessary to reduce the risk of injury or harm occurring to a person or workplace.

Safework NSW